HDPE Blow Moulding Grade BS 501-17
Generic registry number (not stated in the manufacturer TDS)
HDPE/hexen-1 copolymer
- MFR (190 °C / 2.16 kg)
- Typical: 0.18 g/10 min
- MFR (190 °C / 5 kg)
- Typical: 0.94 g/10 min
- MFR (190 °C / 21.6 kg)
- Typical: 22 g/10 min
- Density (23 °C) [3]
- Typical: 950 kg/m³
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C / 2.16 kg) | Typical: 0.18 g/10 min | ISO 1133-1 · °C |
| MFR (190 °C / 5 kg) | Typical: 0.94 g/10 min | ISO 1133-1 · °C |
| MFR (190 °C / 21.6 kg) | Typical: 22 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [3] | Typical: 950 kg/m³ | ISO 1183-2 · °C |
| Tensile Stress at Yield [3] | Typical: 26 MPa | ISO 527-3 |
| Tensile Strain at Yield [3] | Typical: 12 % | ISO 527-3 · % |
| Tensile Stress at Break [3] | Typical: 25 MPa | ISO 527-3 |
| Tensile Strain at Break [3] | Typical: 1200 % | ISO 527-3 · % |
| Flexural Modulus [3] | Typical: 1350 MPa | ISO 178 |
| Izod (notched, 23 °C) [3] | Typical: 15 kJ/m² | ISO 180/A · °C |
| Hardness – Shore D [3] | Typical: 64 | ISO 868 |
| Vicat Softening Temperature [3] | Typical: 128 °C | ISO 306/A 120 · °C |
| ESCR F50 B (100% Igepal CO-630) [3] | Typical: 100 h | ASTM D1693 · % |
| OIT (200 °C) | Typical: >5 min | EN 728 · °C |
| Recommended processing temperature | Typical: 180 – 220 °C | °C |
| Burning rate (HB; 125 × 13 × 3 mm) | Typical: 56 mm/min | UL 94 (2006) |
Detailed application areas
Bottles/cans ≤10 L for aggressive household chemicals and detergents; corrugated pipes. Conventional extrusion. User tests required for suitability and compliance.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg/pallet, shrink- or stretch-wrapped.
Storage
Avoid UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Blow Moulding Grade BS 501-17 is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C / 2.16 kg): Typical: 0.18 g/10 min; MFR (190 °C / 5 kg): Typical: 0.94 g/10 min. KORKİMYA supplies HDPE Blow Moulding Grade BS 501-17 in 25 kg PE bags; 1375 kg/pallet, shrink- or stretch-wrapped..
HDPE/hexen-1 copolymer
- TN-VED Code
- 3901 20
- Category
- Thermoplastic Polymers
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 527-3 · ISO 178 · ISO 180/A · ISO 868 · ISO 306/A 120 · ASTM D1693 · EN 728 · UL 94 (2006)
Key features
Why this product?
- Observe combustible-material fire rules. Lift adhesive-linked bags without rotation first. Dry pellets before use if moisture has condensed.
- Pressed: ISO 293; ISO 291: room-temperature conditioning.
- Test final articles for suitability and regulations, including food contact.
- See DDS for product compliance/safety.
- Dry pellets if moisture condenses.
- Only REACH-compliant raw materials are used.
- Avoid UV and >40 °C.
- High humidity/temperature fluctuations may cause condensation in packaging.
- 25 kg PE bags; 1375 kg/pallet, shrink/stretch wrap.
- Heat-treated PRS pool pallets collected for reuse; remain PRS property.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com