HDPE Injection Moulding Grade 2900J
Generic registry number (not stated in the manufacturer TDS)
Unimodal high density polyethylene copolymer
- MFR (190 °C, 2.16 kg)
- Typical: 2.5 g/10 min
- Density (23 °C) [3]
- Typical: 952 kg/m³
- Flexural modulus [3]
- Typical: 1100 MPa
- Izod impact strength (notched, 23 °C) [5]
- Typical: 10 kJ/m²
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C, 2.16 kg) | Typical: 2.5 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [3] | Typical: 952 kg/m³ | ISO 1183-2 · °C |
| Flexural modulus [3] | Typical: 1100 MPa | ISO 178 |
| Izod impact strength (notched, 23 °C) [5] | Typical: 10 kJ/m² | ISO 180/A · °C |
| Hardness, Shore D [5] | Typical: 60 | ISO 868 |
| Vicat softening temperature [4] | Typical: 128 °C | ISO 306/A 120 · °C |
| ESCR F50 B (100% Igepal CO-630) [3] | Typical: > 15 h | ASTM D1693 · % |
| Recommended processing temperature | Typical: 210 – 250 °C | °C |
Detailed application areas
General purpose industrial and houseware products; can be processed in conventional injection machines.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets.
Storage
Protect from UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Injection Moulding Grade 2900J is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C, 2.16 kg): Typical: 2.5 g/10 min; Density (23 °C) [3]: Typical: 952 kg/m³. KORKİMYA supplies HDPE Injection Moulding Grade 2900J in 25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets..
Unimodal high density polyethylene copolymer
- TN-VED Code
- 3901 20
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 178 · ISO 180/A · ISO 868 · ISO 306/A 120 · ASTM D1693
Key features
Why this product?
- Observe fire safety rules for combustible materials. Lift adhesive-bound bags first without rotation. Dry pellets before use if moisture condenses inside packaging.
- Contains antioxidant and acid scavenger. [3] ISO 293 pressed specimens; ISO 291 room-temperature conditioning. [4] Average of several measurements under the same conditions. [5] Average of several measurements on ISO 294-1 injection-moulded specimens.
- Unimodal HDPE copolymer; good stiffness/processability balance.
- Protect from UV and >40 °C.
- High humidity and fluctuating temperatures may cause condensation in packaging; dry pellets before use.
- 25 kg PE bags; 1375 kg on shrink/stretch-wrapped pallets.
- Anti-slip bag adhesive; lift first without rotation.
- Heat-treated PRS pallets are collected after use and reused; remain PRS property.
- Compliance: see DDS.
- REACH: polymer exempt; monomers/relevant additives registered; only REACH-compliant raw materials used.
- No identified SVHC >0.1% at source date.
- Modern recycling suitable; keep production waste clean for direct recycling.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com