LDPE Film Grade FB 08-50
CAS 9002-88-4
Generic registry number (not stated in the manufacturer TDS)
Low density polyethylene
- MFR (190 °C, 2.16 kg)
- Typical: 0.8 g/10 min
- Density (23 °C) [1]
- Typical: 924 kg/m³
- Tensile stress at break (MD/TD) [7]
- Typical: 21 / 21 MPa
- Tensile strain at break (MD/TD) [7]
- Typical: 400 / 550 %
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C, 2.16 kg) | Typical: 0.8 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [1] | Typical: 924 kg/m³ | ISO 1183-1 · °C |
| Tensile stress at break (MD/TD) [7] | Typical: 21 / 21 MPa | ISO 527-1,3 |
| Tensile strain at break (MD/TD) [7] | Typical: 400 / 550 % | ISO 527-1,3 · % |
| Dart drop [7] | Typical: 200 g | ISO 7765-1 method A |
| Haze [7] | Typical: 7 % | ASTM D1003 · % |
| Vicat softening temperature [2] | Typical: 96 °C | ISO 306/A 50 · °C |
| Antiblock agent content | Typical: 900 ppm | ppm |
| Slip agent content | Typical: 500 ppm | ppm |
| Recommended film thickness | Typical: 0.025 – 0.08 mm | |
| Recommended processing temperature | Typical: 170 – 220 °C | °C |
Detailed application areas
Shrink and technical films; carrier bags and pouches. Conventional extrusion machines. User tests are required for suitability and regulatory compliance.
Packaging & storage
Packaging
25 kg PE bags; shrink/stretch-wrapped pallet: 1375 kg polymer. Road/rail silo transport also available.
Storage
Protect from UV and >40 °C. Dry pellets before use if moisture condenses.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
LDPE Film Grade FB 08-50 (CAS 9002-88-4) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C, 2.16 kg): Typical: 0.8 g/10 min; Density (23 °C) [1]: Typical: 924 kg/m³. KORKİMYA supplies LDPE Film Grade FB 08-50 in 25 kg PE bags; shrink/stretch-wrapped pallet: 1375 kg polymer. Road/rail silo transport also available..
Low density polyethylene
- CAS
- 9002-88-4
- TN-VED Code
- 3901 10
- Category
- Thermoplastic Polymers
Test Methods
ISO 1133-1 · ISO 1183-1 · ISO 527-1,3 · ISO 7765-1 method A · ASTM D1003 · ISO 306/A 50
Key features
Why this product?
- [1] Pressed specimen, internal method. [2] ISO 294-1 injection-moulded specimen. [7] 50 µm blown film; melt 180 °C, blow-up ratio 2.5:1. Observe fire rules for combustible materials.
- [1] Density measured on pressed mould specimen according to internal method.
- [2] Typical properties measured on standard injection moulded test specimen according to ISO 294-1.
- [7] Film properties tested using 50 µm thick blown film extruded at melt temperature of 180°C and blow up ratio 2.5:1.
- Shrink/technical films, carrier bags and pouches; conventional extrusion.
- Final-article tests are required for suitability and compliance, including food contact.
- Compliance: DDS.
- Modern recycling; keep production waste clean for direct recycling.
- REACH: polymers exempt; monomers/relevant additives registered.
- Only compliant raw materials used; no identified SVHC >0.1% at publication.
- High humidity/fluctuating temperatures may cause condensation in packing; dry pellets.
- Heat-treated pooling pallets remain provider property; collected for reuse.
- Producer commits to use only REACH-compliant raw materials.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com