LDPE Film Grade FD 243-55
CAS 9002-88-4
Generic registry number (not stated in the manufacturer TDS)
Low density polyethylene
- MFR (190 °C, 2.16 kg)
- Typical: 4 g/10 min
- Density (23 °C) [3]
- Typical: 922 kg/m³
- Tensile stress at break (MD/TD) [11]
- Typical: 19 / 15 MPa
- Tensile strain at break (MD/TD) [11]
- Typical: 270 / 500 %
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C, 2.16 kg) | Typical: 4 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [3] | Typical: 922 kg/m³ | ISO 1183-2 · °C |
| Tensile stress at break (MD/TD) [11] | Typical: 19 / 15 MPa | ISO 527-1,3 |
| Tensile strain at break (MD/TD) [11] | Typical: 270 / 500 % | ISO 527-1,3 · % |
| Dart drop [11] | Typical: 80 g | ISO 7765-1 method A |
| Haze [11] | Typical: 9 % | ISO 14782 · % |
| Vicat softening temperature [3] | Typical: 94 °C | ISO 306/A 120 · °C |
| Antiblock agent content | Typical: 1400 ppm | Internal method · ppm |
| Slip agent content | Typical: 700 ppm | Internal method · ppm |
| Recommended film thickness | Typical: 0.015 – 0.04 mm | |
| Recommended processing temperature | Typical: 150 – 190 °C | °C |
Detailed application areas
High clarity fine films, caps. Can be used in conventional extrusion machines. Users must test suitability and final article regulatory compliance.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets. Road or rail silo transport is also available.
Storage
Protect from UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
LDPE Film Grade FD 243-55 (CAS 9002-88-4) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C, 2.16 kg): Typical: 4 g/10 min; Density (23 °C) [3]: Typical: 922 kg/m³. KORKİMYA supplies LDPE Film Grade FD 243-55 in 25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets. Road or rail silo transport is also available..
Low density polyethylene
- CAS
- 9002-88-4
- TN-VED Code
- 3901 10
- Category
- Thermoplastic Polymers
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 527-1,3 · ISO 7765-1 method A · ISO 14782 · ISO 306/A 120 · Internal method
Key features
Why this product?
- Observe fire safety rules for combustible materials. Lift bags first without rotation; adhesive is used between bags. Dry pellets before use if moisture condenses inside packaging.
- [3] ISO 293 pressed specimens; ISO 291 room-temperature conditioning. [11] MD/TD film: 0.04 mm for this grade; blow up ratio 2:1.
- Films have excellent mechanical and optical properties; contains slip and antiblock agents.
- See DDS for relevant compliance including food contact.
- Avoid UV and >40 °C; high humidity and fluctuating temperatures may cause condensation in packaging. 25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets.
- Heat-treated pooling pallets are collected for reuse after use and remain the provider’s property.
- Compliance: see DDS.
- Source REACH statement: Polymers are registration-exempt; monomers and relevant additives are registered; only REACH-compliant raw materials are used.
- No identified SVHC >0.1% at source publication.
- Suitable for modern recycling; keep production waste clean for direct recycling.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com