MDPE Film Grade FS 340-03
Generic registry number (not stated in the manufacturer TDS)
Medium density PE
- Melt mass-flow rate (2.16 kg)
- Typical: 0.17 g/10 min
- Melt mass-flow rate (5 kg)
- Typical: 0.78 g/10 min
- Melt mass-flow rate (21.6 kg)
- Typical: 14 g/10 min
- Density (23 °C) [3]
- Typical: 935 kg/m³
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Melt mass-flow rate (2.16 kg) | Typical: 0.17 g/10 min | ISO 1133-1 · g/10 min |
| Melt mass-flow rate (5 kg) | Typical: 0.78 g/10 min | ISO 1133-1 · g/10 min |
| Melt mass-flow rate (21.6 kg) | Typical: 14 g/10 min | ISO 1133-1 · g/10 min |
| Density (23 °C) [3] | Typical: 935 kg/m³ | ISO 1183-2 · °C |
| Yield stress (MD/TD) [15] | Typical: 22 / 17 MPa | ISO 527-3 |
| Break stress (MD/TD) [15] | Typical: 47 / 43 MPa | ISO 527-3 |
| Break strain (MD/TD) [15] | Typical: 700 / 800 % | ISO 527-3 · % |
| Flexural modulus [3] | Typical: 800 MPa | ISO 178 |
| Elmendorf tear (MD/TD) [15] | Typical: 50 / 280 cN | ISO 6383-2 |
| Dart drop [15] | Typical: 86 g | ISO 7765-1 method A |
| Hardness – Shore D [3] | Typical: 60 | ISO 868 |
| Vicat softening temperature [3] | Typical: 119 °C | ISO 306/A 120 · °C |
| Oxidation induction time | Typical: 25 min | EN 728 |
| Recommended film thickness | Typical: 0.015 – 0.06 mm | |
| Recommended processing temp. | Typical: 180 – 220 °C | °C |
Detailed application areas
Bags, shopping/garbage bags; shrink, multi-layer films; LDPE blends. Users must test suitability and regulatory compliance.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg on shrink-/stretch-wrapped pallets.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
MDPE Film Grade FS 340-03 is an industrial product in the thermoplastic polymers category. Typical specifications: Melt mass-flow rate (2.16 kg): Typical: 0.17 g/10 min; Melt mass-flow rate (5 kg): Typical: 0.78 g/10 min; Melt mass-flow rate (21.6 kg): Typical: 14 g/10 min. KORKİMYA supplies MDPE Film Grade FS 340-03 in 25 kg PE bags; 1375 kg on shrink-/stretch-wrapped pallets..
Medium density PE; hexen-1
- TN-VED Code
- 3901 10
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 527-3 · ISO 178 · ISO 6383-2 · ISO 7765-1 method A · ISO 868 · ISO 306/A 120 · EN 728
Key features
Why this product?
- Lift bags before rotating (adhesive). Observe fire rules. Dry damp pellets. Avoid UV and >40 °C.
- Contains antioxidants and acid scavenger.
- Can be used in conventional extrusion machines.
- [3] Pressed: ISO 293; conditioned: ISO 291, room temperature. [15] Film: 0.025 mm; blow up ratio: 4:1; MD machine/TD transverse; measurement averages.
- Bags, shopping/garbage bags; shrink/multilayer film; LDPE blend component.
- Users must test suitability and regulatory compliance (e.g. food contact), including final articles.
- Product compliance/safety: DDS.
- Use conventional extrusion machines.
- Lift adhesive-stacked bags before rotating.
- Follow combustible-material fire rules.
- High humidity/fluctuating temperatures may cause condensation in packs; dry before use.
- Protect from UV and >40 °C. 25 kg PE bags; shrink/stretch pallet: 1375 kg.
- Heat-treated pooling pallets are collected/reused and remain provider property.
- MDPE film copolymer with hexen-1; antioxidants and acid scavenger; very good Elmendorf tear and excellent dart resistance.
- Polymers are REACH-exempt; monomers/relevant additives are registered.
- Only REACH-compliant raw materials are used.
- At source revision, no identified SVHC >0.1%.
- Suitable for modern recycling; keep in-house waste clean for direct recycling.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com