MDPE Film Grade FS 383-03
Generic registry number (not stated in the manufacturer TDS)
PE/hexene-1 copolymer
- MFR (190°C, 2.16 kg)
- Typical: 0.18 g/10 min
- MFR (190°C, 5 kg)
- Typical: 0.8 g/10 min
- MFR (190°C, 21.6 kg)
- Typical: 15 g/10 min
- Density (23°C) [3]
- Typical: 938 kg/m³
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| MFR (190°C, 2.16 kg) | Typical: 0.18 g/10 min | ISO 1133-1 · °C |
| MFR (190°C, 5 kg) | Typical: 0.8 g/10 min | ISO 1133-1 · °C |
| MFR (190°C, 21.6 kg) | Typical: 15 g/10 min | ISO 1133-1 · °C |
| Density (23°C) [3] | Typical: 938 kg/m³ | ISO 1183-2 · °C |
| Yield stress MD/TD [15] | Typical: 23 / 18 MPa | ISO 527-3 |
| Break stress MD/TD [15] | Typical: 51 / 43 MPa | ISO 527-3 |
| Break strain MD/TD [15] | Typical: 700 / 800 % | ISO 527-3 · % |
| Flexural modulus [3] | Typical: 850 MPa | ISO 178 |
| Elmendorf tear MD/TD [15] | Typical: 47 / 280 cN | ISO 6383-2 |
| Dart drop [15] | Typical: 90 g | ISO 7765-1 method A |
| Hardness – Shore D [3] | Typical: 60 | ISO 868 |
| Vicat softening temperature [3] | Typical: 121 °C | ISO 306/A 120 · °C |
| OIT (200°C) | Typical: 30 min | EN 728 · °C |
| Recommended film thickness | Typical: 0.015 – 0.06 mm | |
| Recommended processing temperature | Typical: 180 – 220 °C | °C |
Detailed application areas
Bags, shopping and garbage bags, shrink and multi-layer films; blend component for LDPE. Suitability and regulatory compliance (including food contact) require user tests.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg/pallet. Shrink- or stretch-wrapped pallets.
Storage
Avoid UV and >40°C. Humidity/temperature changes can cause condensation.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
MDPE Film Grade FS 383-03 is an industrial product in the thermoplastic polymers category. Typical specifications: MFR (190°C, 2.16 kg): Typical: 0.18 g/10 min; MFR (190°C, 5 kg): Typical: 0.8 g/10 min; MFR (190°C, 21.6 kg): Typical: 15 g/10 min. KORKİMYA supplies MDPE Film Grade FS 383-03 in 25 kg PE bags; 1375 kg/pallet. Shrink- or stretch-wrapped pallets..
PE/hexene-1 copolymer
- TN-VED Code
- 3901 10
- Category
- Thermoplastic Polymers
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 527-3 · ISO 178 · ISO 6383-2 · ISO 7765-1 method A · ISO 868 · ISO 306/A 120 · EN 728
Key features
Why this product?
- Conventional extrusion. Lift adhered bags without rotation first. Observe combustible-material fire rules; dry pellets if condensation occurs. [3] ISO 293 pressed specimens, ISO 291 room-temperature conditioning. [15] Average: 0.025 mm film, blow-up 4:1. MD/TD: machine/transverse direction.
- Medium density PE/hexene-1; pellets. Contains antioxidants and acid scavenger.
- See DDS for compliance and product safety.
- Bags have anti-slip adhesive between them; lift without rotation first.
- Heat-treated pallets remain provider-owned; the pooling system collects and reuses them after use.
- Very good Elmendorf tear and dart-drop resistance.
- Polymer is REACH-exempt; monomers/relevant additives are registered and only REACH-compliant raw materials are used.
- No identified SVHC >0.1% at source revision.
- Suitable for modern recycling; keep in-house waste clean for direct recycling.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com