Polypropylene RPG1350-21
Thin-Wall Packaging · General-Purpose Plastic Manufacturing · Injection Moulding
- Production method
- Gas-phase propylene polymerisation
- Melt flow index, g/10 min
- 29,8 – 40,3
- Within-batch melt flow index deviation, %, max.
- max ±10
- Tensile yield strength, MPa, min.
- Not standardised
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Production method | Gas-phase propylene polymerisation | — |
| Melt flow index, g/10 min | 29,8 – 40,3 | g/10 min |
| Within-batch melt flow index deviation, %, max. | max ±10 | % |
| Tensile yield strength, MPa, min. | Not standardised | — |
| Elongation at yield, %, min. | Not standardised | % |
| Mass fraction of volatile matter, %, max. | max 0,09 | % |
Detailed application areas
Thin-wall general-purpose products.
Use Cases
- Thin-Wall Packaging
- General-Purpose Plastic Manufacturing
- Injection Moulding
- Consumer Products
Packaging & storage
Packaging
Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road.
Shelf Life
3 years from the date of manufacture
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
Regulatory and compliance
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
Polypropylene RPG1350-21 is a grade used in thin-wall general-purpose products, with a melt flow index of 29.8-40.3 g/10 min. Typical specifications: Production method: Gas-phase propylene polymerisation; Melt flow index, g/10 min 29,8–40,3; Within-batch melt flow index deviation, %, max. ±10. KORKİMYA supplies Polypropylene RPG1350-21 in Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road.. Shelf life: 3 years from the date of manufacture.
Thin-wall general-purpose products.
Polypropylene RPG1350-21 is a grade used in thin-wall general-purpose products, with a melt flow index of 29.8-40.3 g/10 min.
- Category
- Thermoplastic Polymers
Frequently asked questions
Where is RPG1350-21 used?
Polypropylene RPG1350-21 is used in thin-wall general-purpose products. Areas of use: Thin-Wall Packaging, General-Purpose Plastic Manufacturing, Injection Moulding, Consumer Products. Production method: Gas-phase propylene polymerisation.
What are the melt flow index and batch deviation of RPG1350-21?
The melt flow index of RPG1350-21 is 29.8-40.3 g/10 min. Within-batch melt flow index deviation max ±10 %.
Which other values are stated for RPG1350-21?
Stated values for RPG1350-21: Tensile yield strength not standardised; Elongation at yield not standardised; Mass fraction of volatile matter max 0.09 %.
Related Products
Last updated: 04/10/2026
MSDS Available · Export Registered · korkimya.com