PP Homopolymer General Purpose Grade HG 10 07
CAS 9003-07-0
Generic registry number (not stated in the manufacturer TDS)
Polypropylene homopolymer
- MFR (230 °C, 2.16 kg)
- Typical: 10 g/10 min
- Tensile stress at yield [2]
- Typical: 36 MPa
- Tensile strain at yield [2]
- Typical: 8 %
- Flexural modulus [2]
- Typical: 1900 MPa
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (230 °C, 2.16 kg) | Typical: 10 g/10 min | ISO 1133-1 · °C |
| Tensile stress at yield [2] | Typical: 36 MPa | ISO 527-1,2 |
| Tensile strain at yield [2] | Typical: 8 % | ISO 527-1,2 · % |
| Flexural modulus [2] | Typical: 1900 MPa | ISO 178 |
| Izod impact strength (notched, 23 °C) [2] | Typical: 4 kJ/m² | ISO 180/A · °C |
| HDT (0.45 MPa, flatwise) [2] | Typical: 102 °C | ISO 75-1,2 · °C |
| Recommended processing temperature | Typical: 210 - 260 °C | °C |
Detailed application areas
Especially staple fibres; cast film as the core layer in co-extrusion; injection moulding of sanitary equipment, caps, closures and small technical items. Partially suitable for sheet extrusion, thermoforming and compounding.
Packaging & storage
Packaging
25 kg polyethylene bags; shrink- or stretch-wrapped pallets with 1375 kg polymer. Road or rail silo transport also available.
Storage
Protect from UV radiation and temperatures above 40 °C. Dry pellets before use if high humidity and fluctuating temperatures cause condensation inside packaging.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
PP Homopolymer General Purpose Grade HG 10 07 (CAS 9003-07-0) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (230 °C, 2.16 kg): Typical: 10 g/10 min; Tensile stress at yield [2]: Typical: 36 MPa. KORKİMYA supplies PP Homopolymer General Purpose Grade HG 10 07 in 25 kg polyethylene bags; shrink- or stretch-wrapped pallets with 1375 kg polymer. Road or rail silo transport also available..
Polypropylene homopolymer
- CAS
- 9003-07-0
- TN-VED Code
- 3902 10
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 527-1,2 · ISO 178 · ISO 180/A · ISO 75-1,2
Key features
Why this product?
- For standard extrusion and injection moulding machines. Observe warehouse fire safety rules for combustible materials. [2] Typical properties measured on standard injection moulded test specimens according to ISO 294-1.
- [2] Typical properties measured on standard injection moulded test specimen according to ISO 294-1.
- Good processing stability, excellent spinning, broad processing window.
- Fibre, cast-film and injection processing.
- Especially staple fibres; co-extruded cast-film core layer; injection-moulded sanitary equipment, caps, closures, small technical items.
- Partly suitable for sheet extrusion, thermoforming and compounding.
- Anti-gas-fading additive; no slip/antiblock agents.
- Compliance: DDS.
- 25 kg PE bags; shrink/stretch pallets, 1375 kg.
- Road/rail silo.
- Heat-treated pooled pallets are collected after use for reuse; remain provider property.
- Polymer registration exemption; monomers/relevant additives registered; only REACH-compliant raw materials.
- August 2025: no identified SVHC >0.1%.
- Modern recycling methods; keep in-house waste clean for direct recycling.
- Homopolymer with good processing stability, excellent spinning properties and a broad processing window; suitable for fibres, cast film and injection moulding technologies.
- Contains an anti gas fading additive package; contains neither slip nor antiblocking agent.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com