PP Random Copolymer Injection Grade R 960 A
CAS 9010-79-1
Generic registry number (not stated in the manufacturer TDS)
Reactor grade random copolymer polypropylene
- Melt mass-flow rate
- Typical: 45 g/10 min
- Tensile stress at yield
- Typical: 28 MPa
- Tensile strain at yield
- Typical: 13.5 %
- Flexural modulus
- Typical: 1150 MPa
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| Melt mass-flow rate | Typical: 45 g/10 min | ISO 1133-1 · g/10 min |
| Tensile stress at yield | Typical: 28 MPa | ISO 527-1,2 |
| Tensile strain at yield | Typical: 13.5 % | ISO 527-1,2 · % |
| Flexural modulus | Typical: 1150 MPa | ISO 178 |
| Izod impact strength (notched, 23 °C) | Typical: 5 kJ/m² | ISO 180/A · °C |
| Haze | Typical: 7.3 % | ISO 14782 · % |
| HDT (0.45 MPa, flatwise) | Typical: 73 °C | °C |
| Recommended processing temperature | Typical: 220–240 °C | °C |
Detailed application areas
Injection moulding of household kitchen articles, containers and thin-walled packaging for cosmetics and toiletries where higher gas permeability is no problem. Caps and transparent food containers. Not intended for medical or pharmaceutical applications.
Packaging & storage
Packaging
25 kg PE bags; shrink/stretch-wrapped pallets, 1375 kg polymer. Road/rail silo transport also available.
Storage
Protect from UV and temperatures above 40 °C. Drying pellets before use is recommended if condensation occurs.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
PP Random Copolymer Injection Grade R 960 A (CAS 9010-79-1) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; Melt mass-flow rate: Typical: 45 g/10 min; Tensile stress at yield: Typical: 28 MPa. KORKİMYA supplies PP Random Copolymer Injection Grade R 960 A in 25 kg PE bags; shrink/stretch-wrapped pallets, 1375 kg polymer. Road/rail silo transport also available..
Reactor grade random copolymer polypropylene
- CAS
- 9010-79-1
- TN-VED Code
- 3902 30
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 527-1,2 · ISO 178 · ISO 180/A · ISO 14782
Key features
Why this product?
- Conventional injection moulding machines. Combustible; observe fire rules. Lift adhered bags without rotation first. [2] ISO 294-1 standard injection moulded specimens. [18] 1 mm wall; melt 230 °C, cooling water 30 °C, overall cycle 15 s.
- [2] Typical properties measured on standard injection moulded test specimen according to ISO 294-1.
- [18] Value measured on specimens with 1 mm wall thickness. Injection moulding conditions: melt temperature 230°C, cooling water 30°C, overall cycle time 15s.
- Reactor-grade PP random copolymer with very narrow molecular weight distribution, good dimensional stability, low warpage and excellent smell/odour and organoleptic behaviour.
- Clarifier and optical whitener provide excellent transparency/gloss; also contains antistatic agent.
- Suitable for modern recycling methods; keep in-house production waste clean for direct recycling.
- High humidity and fluctuating temperatures may cause condensation inside packaging; drying pellets before use is then recommended.
- Heat-treated pooled pallets are collected after use for reuse and remain the pallet provider’s property.
- Product compliance: see DDS.
- Polymers are exempt from REACH registration; monomers and relevant additives are registered, raw materials are REACH compliant.
- At source revision, no specifically identified SVHC >0.1%.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com