PP Random Copolymer Injection Grade RM 45 44
CAS 9010-79-1
Generic registry number (not stated in the manufacturer TDS)
High-fluidity reactor random PP copolymer
- Melt mass-flow rate
- Typical: 45 g/10 min
- Tensile stress at yield
- Typical: 29 MPa
- Tensile strain at yield
- Typical: 11 %
- Flexural modulus
- Typical: 1200 MPa
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Melt mass-flow rate | Typical: 45 g/10 min | ISO 1133-1 · g/10 min |
| Tensile stress at yield | Typical: 29 MPa | ISO 527-1,2 |
| Tensile strain at yield | Typical: 11 % | ISO 527-1,2 · % |
| Flexural modulus | Typical: 1200 MPa | ISO 178 |
| Izod impact strength (notched, 23 °C) | Typical: 4.5 kJ/m² | ISO 180/A · °C |
| Haze | Typical: 7 % | ISO 14782 · % |
| HDT (0.45 MPa, flatwise) | Typical: 78 °C | ISO 75-1,2 · °C |
| Recommended processing temperature | Typical: 220–240 °C | °C |
Detailed application areas
Thin-wall injection moulding of products requiring high clarity and low haze: media boxes, food packages, cups, closures and household articles.
Packaging & storage
Packaging
25 kg PE bags; shrink/stretch-wrapped pallets, 1375 kg polymer. Road/rail silo transport also available.
Storage
Protect from UV and temperatures above 40 °C. Drying pellets before use is recommended if condensation occurs.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
PP Random Copolymer Injection Grade RM 45 44 (CAS 9010-79-1) is an industrial product in the thermoplastic polymers category. Typical specifications: Melt mass-flow rate: Typical: 45 g/10 min; Tensile stress at yield: Typical: 29 MPa; Tensile strain at yield: Typical: 11 %. KORKİMYA supplies PP Random Copolymer Injection Grade RM 45 44 in 25 kg PE bags; shrink/stretch-wrapped pallets, 1375 kg polymer. Road/rail silo transport also available..
High-fluidity reactor random PP copolymer; clarifying and antistatic agents
- CAS
- 9010-79-1
- TN-VED Code
- 3902 30
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 527-1,2 · ISO 178 · ISO 180/A · ISO 14782 · ISO 75-1,2
Key features
Why this product?
- Standard injection moulding machines. Combustible; observe warehouse fire rules. [2] ISO 294-1 injection specimens. [18] 1 mm wall; melt 230 °C, cooling water 30 °C, cycle 15 s.
- [2] Typical properties measured on standard injection moulded test specimen according to ISO 294-1.
- [18] Value measured on specimens with 1 mm wall thickness. Injection moulding conditions: melt temperature 230°C, cooling water 30°C, overall cycle time 15s.
- Polymers are exempt from REACH registration; monomers and relevant additives registered.
- Only REACH-compliant raw materials are used.
- Source dated August/2025 states no specifically identified SVHC at levels greater than 0.1%.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com