HDPE Blow Moulding Grade 6900M
Generic registry number (not stated in the manufacturer TDS)
Bimodal HDPE copolymer
- Melt Mass-Flow Rate (190 °C, 5 kg)
- Typical: 0.3 g/10 min
- Density (23 °C)
- Typical: 952 kg/m³
- Flexural Modulus
- Typical: 1300 MPa
- Hardness — Shore D
- Typical: 63
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| Melt Mass-Flow Rate (190 °C, 5 kg) | Typical: 0.3 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) | Typical: 952 kg/m³ | ISO 1183-2 · °C |
| Flexural Modulus | Typical: 1300 MPa | ISO 178 |
| Hardness — Shore D | Typical: 63 | ISO 868 |
| Vicat Softening Temperature | Typical: 125 °C | ISO 306/A 120 · °C |
| ESCR F50 B (10% Igepal CO-630) | Typical: 700 h | ASTM D1693 · % |
| Recommended Processing Temperature | Typical: 180 – 220 °C | °C |
Detailed application areas
Blow moulding of bottles, cans and drums for detergents and aggressive household chemicals; sheets, non-pressure protective pipes and corrugated pipes. Can be used in conventional extrusion machines.
Packaging & storage
Packaging
25 kg polyethylene bags; 1375 kg polymer on shrink-wrapped or stretch-wrapped pallets.
Storage
Avoid UV radiation and temperatures above 40 °C. High humidity and fluctuating temperatures may cause condensation inside the packing.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Blow Moulding Grade 6900M is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; Melt Mass-Flow Rate (190 °C, 5 kg): Typical: 0.3 g/10 min; Density (23 °C): Typical: 952 kg/m³. KORKİMYA supplies HDPE Blow Moulding Grade 6900M in 25 kg polyethylene bags; 1375 kg polymer on shrink-wrapped or stretch-wrapped pallets..
Bimodal HDPE copolymer; butene-1 comonomer
- TN-VED Code
- 3901 20
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 178 · ISO 868 · ISO 306/A 120 · ASTM D1693
Key features
Why this product?
- Adhesive between bags prevents slipping; lift bags first without rotation when removing from pallets. Observe fire safety rules for combustible materials. Dry pellets before use if moisture condenses inside the packing.
- Contains antioxidant and acid scavenger. Intended for products requiring good environmental stress cracking resistance (ESCR) and high rigidity.
- Density, flexural modulus, Shore D hardness, Vicat softening temperature and ESCR measured on standard pressed specimens (ISO 293) conditioned at room temperature (ISO 291).
- Heat-treated pooling pallets are collected for reuse after use and remain the provider’s property.
- [3] ISO 293 pressed specimens conditioned at room temperature per ISO 291.
- Compliance: see DDS.
- Source REACH statement: Polymers are registration-exempt; monomers and relevant additives are registered; only REACH-compliant raw materials are used.
- No identified SVHC >0.1% at source publication.
- Suitable for modern recycling; keep production waste clean for direct recycling.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com