HDPE Blow Moulding Grade BA 479-02
Generic registry number (not stated in the manufacturer TDS)
HDPE copolymer
- MFR (190 °C, 2.16 kg)
- Typical: 0.25 g/10 min
- Density (23 °C) [3]
- Typical: 947 kg/m³
- Flexural modulus [3]
- Typical: 1200 MPa
- Hardness, Shore D [4]
- Typical: 65
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C, 2.16 kg) | Typical: 0.25 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [3] | Typical: 947 kg/m³ | ISO 1183-2 · °C |
| Flexural modulus [3] | Typical: 1200 MPa | ISO 178 |
| Hardness, Shore D [4] | Typical: 65 | ISO 868 |
| Vicat softening temperature [4] | Typical: 127 °C | ISO 306/A 120 · °C |
| ESCR F50 B (100% Igepal CO-630) [3] | Typical: 350 h | ASTM D1693 · % |
| Recommended processing temperature | Typical: 170 – 220 °C | °C |
Detailed application areas
Blow moulding of bottles and cans for packaging detergents and aggressive household chemicals; sheets, non-pressure protective pipes and corrugated pipes. Can be processed in conventional extrusion machines.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets.
Storage
Protect from UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Blow Moulding Grade BA 479-02 is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C, 2.16 kg): Typical: 0.25 g/10 min; Density (23 °C) [3]: Typical: 947 kg/m³. KORKİMYA supplies HDPE Blow Moulding Grade BA 479-02 in 25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets..
HDPE copolymer; hexene-1 comonomer
- TN-VED Code
- 3901 20
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 178 · ISO 868 · ISO 306/A 120 · ASTM D1693
Key features
Why this product?
- Observe fire safety rules for combustible materials. Lift adhesive-bound bags first without rotation. Dry pellets before use if moisture condenses inside packaging.
- Contains antioxidants. [3, 4] ISO 293 pressed specimens; ISO 291 room-temperature conditioning. [4] Average of several measurements.
- Observe combustible-material fire rules.
- Lift bags without rotation first.
- Dry pellets if high humidity and fluctuating temperatures cause condensation in packaging.
- Compliance: see DDS.
- REACH: polymers exempt; monomers/relevant additives registered, only compliant raw materials used; source states no identified SVHC >0.1%.
- Protect from UV and >40 °C.
- Recyclable by modern methods; keep production waste clean for direct recycling.
- 25 kg PE bags; shrink/stretch pallet: 1375 kg.
- Anti-slip adhesive between bags.
- Heat-treated pooling pallets are collected after use and reused; they remain provider property.
- For products needing good ESCR and high rigidity; contains antioxidants.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com