LDPE Film Grade FB 03-02
CAS 9002-88-4
Generic registry number (not stated in the manufacturer TDS)
Low density polyethylene
- Melt Mass-Flow Rate (190 °C, 2.16 kg)
- Typical: 0.3 g/10 min
- Density (23 °C) [1]
- Typical: 923 kg/m³
- Tensile Stress at Break (MD/TD) [6]
- Typical: 28 / 28 MPa
- Tensile Strain at Break (MD/TD) [6]
- Typical: 500 / 580 %
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| Melt Mass-Flow Rate (190 °C, 2.16 kg) | Typical: 0.3 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [1] | Typical: 923 kg/m³ | ISO 1183-1 · °C |
| Tensile Stress at Break (MD/TD) [6] | Typical: 28 / 28 MPa | ISO 527-1,3 |
| Tensile Strain at Break (MD/TD) [6] | Typical: 500 / 580 % | ISO 527-1,3 · % |
| Dart Drop [6] | Typical: 270 g | ISO 7765-1 method A |
| Haze [6] | Typical: 9 % | ASTM D1003 · % |
| Vicat Softening Temperature [2] | Typical: 96 °C | ISO 306/A 50 · °C |
| Recommended Film Thickness | Typical: 0.07 – 0.22 mm | |
| Recommended Processing Temperature | Typical: 170 – 220 °C | °C |
Detailed application areas
Heavy duty and shrink films; blow moulding of various containers and bottles; pipes, sheets and profiles extrusion. Users must carry out their own tests for suitability and regulatory compliance.
Packaging & storage
Packaging
25 kg PE bags; shrink/stretch-wrapped pallets with 1375 kg polymer. Road or rail silo transportation also available.
Storage
Do not expose to UV radiation or temperatures above 40 °C. High humidity and fluctuating temperatures may cause condensation inside packaging.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
LDPE Film Grade FB 03-02 (CAS 9002-88-4) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; Melt Mass-Flow Rate (190 °C, 2.16 kg): Typical: 0.3 g/10 min; Density (23 °C) [1]: Typical: 923 kg/m³. KORKİMYA supplies LDPE Film Grade FB 03-02 in 25 kg PE bags; shrink/stretch-wrapped pallets with 1375 kg polymer. Road or rail silo transportation also available..
Low density polyethylene; additives free
- CAS
- 9002-88-4
- TN-VED Code
- 3901 10
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-1 · ISO 527-1,3 · ISO 7765-1 method A · ASTM D1003 · ISO 306/A 50
Key features
Why this product?
- Can be used in conventional extrusion machines. Observe fire safety rules for combustible materials. Dry pellets before use if moisture condenses in packaging. [1] Density measured on pressed mould specimen by internal method. [2] ISO 294-1 injection moulded specimen. [6] 50 µm blown film; melt temperature 200 °C, blow up ratio 2.5:1.
- Additives-free film grade; good processability, flexibility, toughness and tear strength.
- [1] Density has been measured on pressed mould specimen according to internal method.
- [2] Typical properties measured on standard injection moulded test specimen according to ISO 294-1.
- [6] Film properties tested using 50 µm thick blown film extruded at melt temperature of 200°C and blow up ratio 2.5:1.
- Only REACH-compliant raw materials are used.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com