LDPE Film Grade FC 4-32
CAS 9002-88-4
Generic registry number (not stated in the manufacturer TDS)
Additive-free LDPE with increased density (MD LDPE)
- MFR (190 °C, 2.16 kg)
- Typical: 4 g/10 min
- Density (23 °C) [1]
- Typical: 929 kg/m³
- Tensile stress at break (MD/TD) [8]
- Typical: 20 / 19 MPa
- Tensile strain at break (MD/TD) [8]
- Typical: 620 / 680 %
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| MFR (190 °C, 2.16 kg) | Typical: 4 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [1] | Typical: 929 kg/m³ | ISO 1183-1 · °C |
| Tensile stress at break (MD/TD) [8] | Typical: 20 / 19 MPa | ISO 527-1,3 |
| Tensile strain at break (MD/TD) [8] | Typical: 620 / 680 % | ISO 527-1,3 · % |
| Dart drop [8] | Typical: 95 g | ISO 7765-1 method A |
| Haze [8] | Typical: 7 % | ASTM D1003 · % |
| Gloss 20° [8] | Typical: 98 | ASTM D2457 |
| Vicat softening temperature [2] | Typical: 102 °C | ISO 306/A 50 · °C |
| Recommended film thickness | Typical: 0.015 – 0.06 mm | |
| Recommended processing temperature | Typical: 160 – 200 °C | °C |
Detailed application areas
Bags and pouches, lamination films and surface protection films. Suitable for conventional extrusion machines. User must carry out tests for suitability and regulatory compliance.
Packaging & storage
Packaging
25 kg PE bags; shrink/stretch-wrapped pallet: 1375 kg polymer. Road or rail silo transport also available.
Storage
Protect from UV and temperatures above 40 °C. Dry before use if moisture condenses under high humidity and fluctuating temperatures.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
LDPE Film Grade FC 4-32 (CAS 9002-88-4) is an industrial product in the thermoplastic polymers category. Typical specifications: MFR (190 °C, 2.16 kg): Typical: 4 g/10 min; Density (23 °C) [1]: Typical: 929 kg/m³; Tensile stress at break (MD/TD) [8]: Typical: 20 / 19 MPa. KORKİMYA supplies LDPE Film Grade FC 4-32 in 25 kg PE bags; shrink/stretch-wrapped pallet: 1375 kg polymer. Road or rail silo transport also available..
Additive-free LDPE with increased density (MD LDPE)
- CAS
- 9002-88-4
- TN-VED Code
- 3901 10
- Category
- Thermoplastic Polymers
Test Methods
ISO 1133-1 · ISO 1183-1 · ISO 527-1,3 · ISO 7765-1 method A · ASTM D1003 · ASTM D2457 · ISO 306/A 50
Key features
Why this product?
- [1] Density: pressed mould specimen per internal method. [2] ISO 294-1 injection moulded specimen. [8] 50 µm blown film; melt 170 °C, blow-up ratio 2.5:1. Observe fire safety rules for combustible materials.
- [1] Density has been measured on pressed mould specimen according to internal method.
- [2] Typical properties measured on standard injection moulded test specimen according to ISO 294-1.
- [8] Film properties tested using 50 µm thick blown film extruded at melt temperature of 170°C and blow up ratio 2.5:1.
- Bags, pouches, lamination and surface protection films; conventional extrusion.
- Test final articles for suitability and regulatory compliance, including food contact.
- Additive-free LDPE with increased density (MD LDPE); high film rigidity, excellent optics and low gel content; very good draw down and high output when properly fabricated.
- Heat-treated pooling pallets remain provider-owned; collected after use for reuse.
- REACH: polymers exempt; monomers/relevant additives registered; only REACH-compliant raw materials used.
- No SVHC >0.1% at source date.
- Modern recycling suitable; keep in-house waste clean.
- Compliance: DDS; safety: MSDS.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com