HDPE Recycled Film Grade 30CHDUF00-2G01
Unimodal HDPE
- MFR (190 °C / 2.16 kg)
- Typical: 0.3 g/10 min
- MFR (190 °C / 5 kg)
- Typical: 1.4 g/10 min
- MFR (190 °C / 21.6 kg)
- Typical: 26 g/10 min
- Density
- Typical: 0.943 g/cm³
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| MFR (190 °C / 2.16 kg) | Typical: 0.3 g/10 min | ISO 1133 · °C |
| MFR (190 °C / 5 kg) | Typical: 1.4 g/10 min | ISO 1133 · °C |
| MFR (190 °C / 21.6 kg) | Typical: 26 g/10 min | ISO 1133 · °C |
| Density | Typical: 0.943 g/cm³ | ISO 1183/A · g/cm³ |
| Flexural modulus | Typical: 900 MPa | ISO 178 |
| Tensile stress at yield (MD/TD) | Typical: 21 MPa | ISO 527-3 |
| Tensile strain at break (MD/TD) | Typical: 1500 % | ISO 527-3 · % |
| Tensile strain at break (MD/TD) (23 °C, notched) | Typical: 13 % | ISO 527-3 · °C |
| OIT – Oxidation Induction Time (200 °C) | Typical: 75 min | EN 728 · °C |
Detailed application areas
Alternative to FA 381-10; bags, shopping bags, garbage bags, shrink films, multi-layer films and blend component for LDPE. Must not be used for medical, pharmaceutical, food, drinking water applications or toys.
Packaging & storage
Packaging
Big-bags or 25 kg polyethylene bags on shrink- or stretch-wrapped pallets.
Storage
Protect from UV and temperatures above 40 °C. Drying before use is recommended if humidity and temperature fluctuations cause condensation in packaging.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Recycled Film Grade 30CHDUF00-2G01 is an industrial product in the pe compounds category. Typical specifications: MFR (190 °C / 2.16 kg): Typical: 0.3 g/10 min; MFR (190 °C / 5 kg): Typical: 1.4 g/10 min; MFR (190 °C / 21.6 kg): Typical: 26 g/10 min. KORKİMYA supplies HDPE Recycled Film Grade 30CHDUF00-2G01 in Big-bags or 25 kg polyethylene bags on shrink- or stretch-wrapped pallets..
Unimodal HDPE; 30% post-consumer recyclate Unimodal HDPE blend with 30% post-consumer recyclate (PCR), developed for film applications; lowered carbon footprint. Special additivation gives an opportunity to make repeated recycling possible. Available in grey and nature.
- Category
- PE Compounds
Synonyms
Test Methods
ISO 1133 · ISO 1183/A · ISO 178 · ISO 527-3 · EN 728
Key features
Why this product?
- TYPICAL PROPERTIES · NOT SPECIFICATION
- Appearance: Grey or natural pellets
- Standard film machines; recommended temperature 180–220 °C. Drying is normally unnecessary; if wet, pre-drying for about 2 hours at 80 °C is recommended. Observe fire safety rules for combustible materials. Bags may have adhesive between them; lift from pallets first without rotation.
- TEST NOTE: Mechanical values: ISO 293 standard compression molded specimens; conditioned at room temperature for 72 hours (ISO 291).
- Designed for easy processability on standard film machines.
- Recycling is possible using dedicated shredding/cleaning procedures; clean in-house production waste can be directly recycled.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com