HDPE Blow Moulding Grade 6301B
Generic registry number (not stated in the manufacturer TDS)
Bimodal HDPE
- MFR (190 °C / 2.16 kg)
- Typical: 0.3 g/10 min
- MFR (190 °C / 5 kg)
- Typical: 1.3 g/10 min
- MFR (190 °C / 21.6 kg)
- Typical: 30 g/10 min
- Density (23 °C) [3]
- Typical: 954 kg/m³
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C / 2.16 kg) | Typical: 0.3 g/10 min | ISO 1133-1 · °C |
| MFR (190 °C / 5 kg) | Typical: 1.3 g/10 min | ISO 1133-1 · °C |
| MFR (190 °C / 21.6 kg) | Typical: 30 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [3] | Typical: 954 kg/m³ | ISO 1183-2 · °C |
| Tensile stress at yield [3] | Typical: 28 MPa | ISO 527-3 |
| Tensile strain at yield [3] | Typical: 10 % | ISO 527-3 · % |
| Tensile stress at break [3] | Typical: 20 MPa | ISO 527-3 |
| Tensile strain at break [3] | Typical: 1100 % | ISO 527-3 · % |
| Flexural modulus [3] | Typical: 1500 MPa | ISO 178 |
| Notched Izod impact (23 °C) [3] | Typical: 8.5 kJ/m² | ISO 180/A · °C |
| Shore D hardness [3] | Typical: 65 | ISO 868 |
| Vicat softening temperature [3] | Typical: 128 °C | ISO 306/A 120 · °C |
| ESCR F50 B (%10 Igepal CO-630) [3] | Typical: 300 h | ASTM D1693 · % |
| OIT (200 °C) | Typical: 105 min | EN 728 · °C |
| Recommended processing temperature | Typical: 180 – 220 °C | °C |
| Burning rate (horizontal) | Typical: 18 mm/min | FMVSS302 (1998) |
Detailed application areas
Bottles/containers ≤10 L for detergents/household chemicals; corrugated pipes. Conventional extrusion. User suitability/regulatory tests required.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg/pallet. Pallets are shrink- or stretch-wrapped.
Storage
Protect from UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Blow Moulding Grade 6301B is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C / 2.16 kg): Typical: 0.3 g/10 min; MFR (190 °C / 5 kg): Typical: 1.3 g/10 min. KORKİMYA supplies HDPE Blow Moulding Grade 6301B in 25 kg PE bags; 1375 kg/pallet. Pallets are shrink- or stretch-wrapped..
Bimodal HDPE; butene-1 comonomer
- TN-VED Code
- 3901 20
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 527-3 · ISO 178 · ISO 180/A · ISO 868 · ISO 306/A 120 · ASTM D1693 · EN 728 · FMVSS302 (1998)
Key features
Why this product?
- [3] Pressed specimens (ISO 293), room-temperature conditioning (ISO 291). Burning test: 350 × 100 × 3 mm pressed specimen. Combustible; observe fire rules. Lift bags without rotation first; dry pellets if condensation occurs.
- Antioxidants/acid scavenger; high stiffness, good ESCR, very good thermo-oxidative stability.
- [3] ISO 293 pressed specimens, ISO 291 room-temperature conditioning.
- Anti-slip adhesive: lift bags without rotation first.
- Recyclable by modern methods; keep in-house production waste clean for direct recycling.
- Protect from UV and >40 °C.
- High humidity and temperature changes may cause condensation in packaging; dry before use.
- 25 kg PE bags; 1375 kg/pallet, shrink/stretch wrapped.
- Heat-treated PRS pallets remain PRS property; the pooling system collects them after use for reuse.
- Product compliance: see DDS.
- Polymers exempt from REACH registration; monomers/relevant additives registered.
- Only REACH-compliant raw materials used; no identified SVHC >0.1%.
- Adhesive is used between bags to prevent slipping.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com