HDPE Blow Moulding Grade 6900B
Generic registry number (not stated in the manufacturer TDS)
Bimodal HDPE copolymer
- MFR (190 °C, 5 kg)
- Typical: 0.65 g/10 min
- Density (23 °C) [3]
- Typical: 956 kg/m³
- Flexural modulus [3]
- Typical: 1300 MPa
- Hardness, Shore D [4]
- Typical: 63
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C, 5 kg) | Typical: 0.65 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [3] | Typical: 956 kg/m³ | ISO 1183-2 · °C |
| Flexural modulus [3] | Typical: 1300 MPa | ISO 178 |
| Hardness, Shore D [4] | Typical: 63 | ISO 868 |
| Vicat softening temperature [4] | Typical: 125 °C | ISO 306/A 120 · °C |
| ESCR F50 B (10% Igepal CO-630) | Typical: > 350 h | % |
| Recommended processing temperature | Typical: 180 – 200 °C | °C |
Detailed application areas
Blow moulding of bottles, cans and drums for detergents and aggressive household chemicals; sheets, non-pressure protective pipes and corrugated pipes. Can be used in conventional extrusion machines.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets.
Storage
Protect from UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Blow Moulding Grade 6900B is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C, 5 kg): Typical: 0.65 g/10 min; Density (23 °C) [3]: Typical: 956 kg/m³. KORKİMYA supplies HDPE Blow Moulding Grade 6900B in 25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets..
Bimodal HDPE copolymer; butene-1
- TN-VED Code
- 3901 20
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 178 · ISO 868 · ISO 306/A 120
Key features
Why this product?
- Observe fire safety rules for combustible materials. Lift adhesive-bound bags first without rotation. Dry pellets before use if moisture condenses inside packaging.
- Contains antioxidant and acid scavenger. [3, 4] ISO 293 pressed specimens; ISO 291 room-temperature conditioning. [4] Average of several measurements.
- Follow combustible-material fire rules.
- Lift bags with anti-slip adhesive before rotating.
- Dry pellets if moisture condenses under high humidity/fluctuating temperatures.
- Bimodal HDPE, butene-1 copolymer; good ESCR, high rigidity.
- Avoid UV and >40°C.
- Modern recycling suitable; keep production waste clean for direct recycling.
- REACH: polymer exempt; monomers/relevant additives registered, only compliant raw materials used.
- At source date, no specifically identified SVHC >0.1%.
- 25 kg PE bags; shrink/stretch pallets: 1375 kg polymer.
- Heat-treated pooled PRS pallets collected/reused; remain PRS property.
- Compliance: DDS; safety: MSDS.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com