MDPE Film Grade FA 381-10
Generic registry number (not stated in the manufacturer TDS)
Medium density PE
- MFR (190 °C, 2.16 kg)
- Typical: 0.28 g/10 min
- MFR (190 °C, 5 kg)
- Typical: 1.2 g/10 min
- MFR (190 °C, 21.6 kg)
- Typical: 21 g/10 min
- Density (23 °C) [3]
- Typical: 938 kg/m³
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C, 2.16 kg) | Typical: 0.28 g/10 min | ISO 1133-1 · °C |
| MFR (190 °C, 5 kg) | Typical: 1.2 g/10 min | ISO 1133-1 · °C |
| MFR (190 °C, 21.6 kg) | Typical: 21 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [3] | Typical: 938 kg/m³ | ISO 1183-2 · °C |
| Tensile stress at yield (MD/TD) [15] | Typical: 22 / 17 MPa | ISO 527-3 |
| Tensile stress at break (MD/TD) [15] | Typical: 47 / 43 MPa | ISO 527-3 |
| Tensile strain at break (MD/TD) [15] | Typical: 750 / 800 % | ISO 527-3 · % |
| Flexural modulus [3] | Typical: 850 MPa | ISO 178 |
| Elmendorf tear resistance (MD/TD) [15] | Typical: 50 / 360 cN | ISO 6383-2 |
| Dart drop [15] | Typical: 85 g | ISO 7765-1 method A |
| Hardness – Shore D [3] | Typical: 60 | ISO 868 |
| Vicat softening temperature [3] | Typical: 121 °C | ISO 306/A 120 · °C |
| OIT (200 °C) | Typical: 25 min | EN 728 · °C |
| Recommended film thickness | Typical: 0.015 – 0.06 mm | |
| Recommended processing temperature | Typical: 180 – 220 °C | °C |
Detailed application areas
Bags, shopping and garbage bags, shrink and multi-layer films; LDPE blend component. Suitability must be assessed by user tests.
Packaging & storage
Storage
Avoid UV and >40 °C; dry before use if condensation occurs.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
MDPE Film Grade FA 381-10 is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C, 2.16 kg): Typical: 0.28 g/10 min; MFR (190 °C, 5 kg): Typical: 1.2 g/10 min.
Medium density PE; hexen-1
- TN-VED Code
- 3901 10
- Category
- Thermoplastic Polymers
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 527-3 · ISO 178 · ISO 6383-2 · ISO 7765-1 method A · ISO 868 · ISO 306/A 120 · EN 728
Key features
Why this product?
- Combustible; observe fire safety rules. Lift bags without rotation. [3] ISO 293 pressed specimens; ISO 291 room-temperature conditioning. [15] Film: 0.025 mm, blow-up 4:1; MD machine, TD transverse direction; measurement averages.
- 25 kg PE bags; shrink- or stretch-wrapped pallets, 1375 kg polymer.
- Very good Elmendorf tear and dart impact resistance; low gel content, good vapour barrier; antioxidants and acid scavenger.
- Applications are recommendations; final-article regulatory compliance, including food contact, also requires testing.
- Use conventional extrusion machines.
- REACH: polymers exempt; monomers/relevant additives registered, only compliant raw materials used.
- No SVHC >0.1% at source revision.
- Recyclable by modern methods; keep production waste clean for direct recycling.
- Product compliance: DDS; safety: MSDS on request.
- Adhesive between bags prevents slipping.
- Medium density PE copolymer; hexen-1
- High humidity and varying temperatures may cause atmospheric moisture to condense inside packaging.
- Heat-treated PRS (Faber Halbertma Group) pallets remain PRS property; pooling system collects them after use and arranges circular reuse.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com