HDPE Blow Moulding Grade 6000B
Generic registry number (not stated in the manufacturer TDS)
Bimodal HDPE copolymer
- MFR (190 °C, 2.16 kg)
- Typical: 0.3 g/10 min
- MFR (190 °C, 5 kg)
- Typical: 1.3 g/10 min
- MFR (190 °C, 21.6 kg)
- Typical: 30 g/10 min
- Density (23 °C)³
- Typical: 958 kg/m³
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C, 2.16 kg) | Typical: 0.3 g/10 min | ISO 1133-1 · °C |
| MFR (190 °C, 5 kg) | Typical: 1.3 g/10 min | ISO 1133-1 · °C |
| MFR (190 °C, 21.6 kg) | Typical: 30 g/10 min | ISO 1133-1 · °C |
| Density (23 °C)³ | Typical: 958 kg/m³ | ISO 1183-2 · °C |
| Tensile stress at yield³ | Typical: 30 MPa | ISO 527-3 |
| Tensile strain at yield³ | Typical: 10 % | ISO 527-3 · % |
| Tensile stress at break³ | Typical: 20 MPa | ISO 527-3 |
| Tensile strain at break³ | Typical: 1100 % | ISO 527-3 · % |
| Flexural modulus³ | Typical: 1700 MPa | ISO 178 |
| Izod impact strength (notched, 23 °C)³ | Typical: 8.5 kJ/m² | ISO 180/A · °C |
| Hardness – Shore D³ | Typical: 66 | ISO 868 |
| Vicat softening temperature³ | Typical: 129 °C | ISO 306/A 120 · °C |
| ESCR F50 B (10% Igepal CO-630)³ | Typical: 150 h | ASTM D1693 · % |
| OIT (200 °C) | Typical: 33 min | EN 728 · °C |
| Recommended processing temperature | Typical: 180 – 220 °C | °C |
| UL 94 (2006) burning rate; HB, 125 × 13 × 3 mm | Typical: 22 mm/min | UL 94 (2006) |
Detailed application areas
Thin-walled bottles up to 5 litres for cosmetics and daily care; aggressive industrial chemical packaging subject to UN certificates; corrugated pipes. Users must test suitability and regulatory compliance.
Packaging & storage
Packaging
25 kg PE bags; shrink- or stretch-wrapped pallets: 1375 kg polymer.
Storage
Protect from UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Blow Moulding Grade 6000B is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C, 2.16 kg): Typical: 0.3 g/10 min; MFR (190 °C, 5 kg): Typical: 1.3 g/10 min. KORKİMYA supplies HDPE Blow Moulding Grade 6000B in 25 kg PE bags; shrink- or stretch-wrapped pallets: 1375 kg polymer..
Bimodal HDPE copolymer
- TN-VED Code
- 3901 20
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 527-3 · ISO 178 · ISO 180/A · ISO 868 · ISO 306/A 120 · ASTM D1693 · EN 728 · UL 94 (2006)
Key features
Why this product?
- Suitable for conventional extrusion machines. Observe combustible-material fire rules. Lift adhesive-linked bags without rotation first; dry pellets before use if moisture condenses.
- Contains antioxidant and acid scavenger. ³ ISO 293 pressed specimens; ISO 291 room-temperature conditioning.
- Lift bags with anti-slip adhesive without rotation first.
- High humidity and fluctuating temperatures may cause condensation in packaging; if it occurs, dry pellets before use.
- See DDS for product compliance.
- Polymer exempt from REACH registration; monomers/relevant additives registered, REACH-compliant raw materials used.
- Source reports no identified SVHC >0.1%.
- Recyclable by modern methods; keep production waste clean for direct recycling.
- Bimodal HDPE copolymer with butene-1 comonomer; high stiffness and good ESCR.
- 25 kg PE bags; shrink/stretch-wrapped pallet: 1375 kg.
- Heat-treated PRS pallets remain PRS property; the pooling system collects them after use for reuse.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com